JAC REMOTE DİJİTAL I/O
>>
RDI 2408 |
| |
|
 |
Özellikler :
- Insulation resistance: 100 M Ohm(min) at
1000Vdc
- Baud rate: 19200, 9600, 4800, 2400,
1200, 600,300, 150 dip switch
selectable
- Operation humidity: 5~95%
RH, non-condensing
- On board build-in s.p.s.: DC +24V 100mA
(Max.)
- Output: 8 relays (5A 250VAC,5A 30VDC) with
LED indicator
- Input: 16
with LED indicator
- Isolation voltage: 2500Vac 1Min
- External supply: 85~220 Vac
- Communication protocol: RS-485
- Station ID: 1-255 dip switch selectable
- Operation temperature : 0 to 70 degree C
- Storage temperature: -20 to 80 degree C
- Dimensions: 205(W) 133(L) 46(H)mm |
JAC REMOTE DİJİTAL I/O
>>
RDI2800
|
 |
Özellikler :
- Input: 28 with LED indicator
- Communication protocol: RS-485
- Isolation V.: 2500Vac 1Min
- Station ID: 1-255 dip switch selectable
- External supply: 85~220 Vac
- Operation temper. : 0 to 70 degree C
- Storage T: -20 to 80 degree C
- Dimensions: 205(W) 133(L) 46(H)mm
- Insulation resistance: 100 M Ohm(min) at
1000Vdc
- Operation humidity: 5~95% RH,
non-condensing
- On board build-in s.p.s.: DC +24V 100mA
(Max.)
- Baud rate: 19200, 9600, 4800, 2400,
1200,600,300, 150 dip switch
selectable |
JAC REMOTE DİJİTAL I/O
>>
9050D
|
 |
|
Özellikler : |
|
-
Interface :RS-485, 2 wires |
|
- Speed
(bps) :1200, 2400, 4800, 9600,
19.2K, 38.4K, 115.2K |
|
- Output channels : 8
non-isolated output
channels |
| - Input channels : 7
non-isolated input
channels |
| - Output characteristic :
open collector
transistor |
| - Output current sink: 30mA
max. |
| - Max output Load voltage :
30 Vdc |
| - Logical level 0 :
+1V
Max. |
| - Logical level 1 :
+3.5V ~
+24V |
| - Input counter :
Counting pulse from channel
7 input |
| - counter frequency :
100Hz Max.
|
| - resolution : 16-bit
(0~65535) |
| - Status indicator : 15
input/output status LED
display |
| - Internal watchdog timer
: 150 msec |
| - Max. power dissipation
: 300mW |
| - Compatible : I-7041D /
uDAM 60412 / ADAM
4041 |
|
JAC REMOTE DİJİTAL I/O >>
9052D
|
|
| Özellikler
: |
| - Interface :RS-485, 2
wires |
| - Speed (bps) :1200, 2400,
4800, 9600, 19.2K, 38.4K, 115.2K
|
- Input channels :6
fully gorund isolated channels / 2 common
ground
channels |
| - logical level 0 : +1V
Max. |
| - logical level 1 : +3.5V
~+24V |
| - Input counter : Counting
pulse from channel 8
input |
| - counter frequency :100Hz
Max. |
| - resolution : 16-bit
(0~65535) |
| - Input impedance : 3K
ohms |
| - Isolation voltage : 5000
Vrms |
| - Status indicator : 8 input
status LED displays |
| - Max. power dissipation
:0.7W |
| - Compatible :I-7052D / uDAM
6052 / ADAM
4052 | |
JAC REMOTE DİJİTAL I/O >>
9060D
|
|
| Özellikler
: |
| - Interface :RS-485, 2 wires
|
| - Speed (bps) :1200, 2400,
4800, 9600, 19.2K, 38.4K,
115.2K |
| - Relay output channels :4
relay output channels |
| - SPST (form A) channels : 2
(N.O.) |
| - SPDT (form C) channels :
2
(N.O./N.C.) |
| - Output mode : Dry contact
output |
| - AC contact rating :
AC:125V @0.6A; AC250V
@0.3A |
| - DC contact rating : DC:30V
@2A; DC110V @0.6A |
| - Relay on time(typical) :
3
msec |
| - Relay off time(typical) :
1
msec |
| - Insulation resistance :
1000M ohms at 500
Vdc |
| - Input channels :
4 isolated input channels
with common power |
| - logical level 0 : +1V
Max. |
| - logical level 1 : +3.5V
~+24V |
| - Input impedance :3K
ohms |
| - Isolation Voltage :
3,750Vrms |
| - Input counter :
Counting pulse from channel
4 input |
| - counter frequency :100Hz
Max. |
| - resolution : 16-bit
(0~65535) |
| - Status indicator : 8 input
status LED displays |
| - Max. power dissipation
:1.2W |
| - Compatible :I-7060D / uDAM
6060 / ADAM
4060 | |
JAC REMOTE DİJİTAL I/O >>
9063D
|
|
| Özellikler
: |
| - Interface :RS-485, 2
wires |
| - Speed (bps) :1200, 2400,
4800, 9600, 19.2K, 38.4K,
115.2K |
| - Relay
output |
| - SPST (form A) channels :3
(Normal open) |
| - Output mode : Dry contact
output |
| - AC contact rating :
AC:250V @5A |
| - DC contact rating : DC:30V
@5A |
| - Relay on time(typical) :
6
msec |
| - Relay off time(typical) :
3
msec |
| - Insulation resistance :
1000M ohms at 500
Vdc |
| - Lift
time:Mechanical :20x10^6 ;
electrical: 100x10^3 |
| - Digital input
|
| -Input channels :
8 isolated input channels
with common power |
| - logical level 0 : +1V
Max. |
| - logical level 1 : +3.5V
~+24V |
| - Input impedance :3K
ohms |
| - Isolation Voltage :
3,750Vrms |
| - Input
counter |
| - counter channels : 4
digital input with counter
function |
| - counter frequency :100Hz
Max. |
| - resolution : 16-bit
(0~65535) |
| - Isolation Voltage :
3,750Vrms |
| - Status indicator : 11
input/output status LED
displays |
| - Max. power dissipation
:1.8W |
| - Compatible : I-7063D /
uDAM 6063 / ADAM
4063 | |
JAC REMOTE DİJİTAL I/O >>
9065AD
|
|
| Özellikler
: |
| - Interface : RS-485, 2
wires |
| - Speed (bps) :1200, 2400,
4800, 9600, 19.2K, 38.4K,
115.2K |
| - AC SSR
output |
| - SPST (form A) channels
: 5 (Normal open) |
| - Output mode : Dry contact
output |
| - Contact rating :
AC:24~265V @1A |
| - Max. loading current : @1.0A |
| - Min. loading current :
@10mA |
| - Relay on time(typical)
:1
msec |
| - Relay off time(typical) :
1.5
msec |
| - Surge strength :
4,000VAC |
| - Lift time :
maintence
free |
| - Digital
input |
| - Input channels :
4 isolated input channels
with common power |
| - logical level 0 : +1V
Max. |
| - logical level 1 : +3.5V
~+24V |
| - Input impedance : 3K
ohms |
| - Isolation Voltage :
3,750Vrms |
| - Input
counter |
| - counter channels: : 4
digital input with counter
function |
| - counter frequency :100Hz
Max. |
| - resolution :16-bit
(0~65535) |
| - Isolation Voltage :
3,750Vrms |
| - Status indicator : 9
input/output status LED
displays |
| - Max. power dissipation :
2.0W |
| - Compatible :
I-7065AD | |
JAC REMOTE ANALOG I/O >>
9014
|
|
| Özellikler
: |
| - Interface :RS-485, 2
wires |
| - Speed (bps) :1200, 2400,
4800, 9600, 19.2K, 38.4K,
115.2K |
| Analog
input |
| - Input channels:1
single-ended channel |
| - Isolation :Photo-isolation
3,750Vrms |
| - Resolution
:16-bit |
| - Input range:+/- 150mV, +/-
500mV,+/- 1V, +/- 5V, +/- 10V and +/-
20mA |
| - Sample rate:10
samples/sec |
| -
Bandwidth:4.0Hz |
| - Zero
drift:5uV/C |
| - Span
drift:25ppm/C |
| - Accuracy:0.05% or
better |
| - CMRR:150 DB min.
@50/60Hz |
| - Over voltage
protection:+/- 10V |
| Digital
input |
| - Input channel
:1 |
| - logical level 0:0 to
1.0V |
| - logical level 1:3.5V to
30V |
| - Bandwidth:50Hz
max. |
| - Pulsewidth:0.5ms
max. |
| Digital
ouput |
| - Input channel
:2 |
| - Output type :Open
collector output |
| - Max. loading :30V@30mA
load max. |
| - Power
consumption:1.4W |
| -
Compatible:I-7014D | |
JAC REMOTE ANALOG I/O >> 9014D
|
|
| Özellikler
: |
| - Interface :RS-485, 2
wires |
| - Speed (bps) :1200, 2400,
4800, 9600, 19.2K, 38.4K,
115.2K |
| - Analog
input |
| - LED indication:LED 4 1/2
digit for displaying analog input
voltage |
| - Input channels:1
single-ended channel |
| - Isolation :Photo-isolation
3,750Vrms |
| - Resolution
:16-bit |
- Input range:+/- 150mV, +/-
500mV,+/- 1V, +/- 5V, +/- 10V and
+/-
20mA |
| - Sample rate:10
samples/sec |
| -
Bandwidth:4.0Hz |
| - Zero
drift:5uV/C |
| - Span
drift:25ppm/C |
| - Accuracy:0.05% or
better |
| - CMRR:150 DB min.
@50/60Hz |
| - Over voltage
protection:+/- 10V |
| - Digital
input |
| - Input channel
:1 |
| - logical level 0:0 to
1.0V |
| - logical level 1:3.5V to
30V |
| - Bandwidth:50Hz max.
|
| - Pulsewidth:0.5ms
max. |
| - Digital
ouput |
| - Input channel
:2 |
| - Output type :Open
collector output |
| - Max. loading :30V@30mA
load max. |
| - Power
consumption:2.1W |
| -
Compatible:I-7014D | |
JAC REMOTE ANALOG I/O >> 9017F
|
|
| Özellikler
: |
| - Interface :RS-485, 2
wires |
| - Speed (bps) :1200, 2400,
4800, 9600, 19.2K, 38.4K,
115.2K |
| - LED indication : LED for
power and communication |
| - Input channels : 6
differential + 2 single-ended or 8
differential |
| - Resolution : 16-bit
/12-bit |
| - Input range : +/-
15 |
| - Isolation : Fully
photo-isolation
3,750Vrms |
| - Sample
rate |
| - normal mode : 10 samples/sec
(16-bit) |
| - fast mode : 60 samples/sec
(12-bit) |
| - Bandwidth : 15.72Hz
(normal); 78.6Hz(fast) |
| - Zero drift : 0.03
uV/C |
| - Span drift : 25
ppm/C |
| - Accuracy |
| - normal mode : 0.1 or
better |
| - fast mode : 0.5 or
better |
| - CMRR : 92 DB min.
@50/60Hz |
| - Over voltage protection :
+/- 35V |
| - Power consumption :
1.4W |
| - Compatible :
I-7017F | |
JAC CONVERTER&REPEATER >> 9520A
|
|
| Özellikler
: |
| - Auto direction flow control
on RS-485 |
| - Auto switching for RS-232 to
RS-422 or
RS-485(jumperless) |
| - Auto switching Baud rate up
to 115.2 Kbps |
| - Minimum 3000 VDC isolation
protection |
| - Transient suppression on
RS-485 data lines |
| - Networking up to 4000
feet |
| - Reserved space for
termination resistors |
| - Power and data flow LED
indicator for
troubleshooting |
| - Power requirement: +10 to
+30 Vdc |
| - Mounts easily on DIN-rail or
panel |
- Power requirement :
Unregulated +10 to +30 V DC with protection
from
power
reversals |
| - Case : ABS with captive
mounting hardware |
- Converted signals : RS-232
to RS-422 or RS-485 Auto
switching(jumperless) |
- Accessories (Supplied) :
NYLON DIN-rail Mounting Adapter
SECC Panel Mounting
Bracke |
- Plug-in screw terminal
wiring : Accepts
AWG 1-#12 to #22 (0.5 to 2.5 mm)
wires |
| - Auto Baud rate (bps) :
300 ~115.2 K
BPS |
| - Data
activity : Transmission and Receiving
LED indicator |
| - Isolation voltage :
3000 V
DC |
| - Isolation Side :
RS-232 |
| - RS-232 interface connector :
Female
DB-9 |
| - RS-422/RS-485 connector :
plug-in screw
terminal |
| - Case : ABS with captive
mounting hardware |
| - Power consumption : 1.2
W | |
JAC CONVERTER&REPEATER >> 9530
|
|
| Özellikler
: |
| - USB 1.1
Compliant |
| - Auto data flow direction
detection on RS-485 |
| - Full-duplex RS-232/RS-422
support |
| - RS-232 RTS & CTS
signals support |
| - Minimum 3000 VDC isolation
protection |
| - Transient suppression on
RS-485 data lines |
- Automatically switch USB
signal to
RS-232/RS-422 or RS-485
(jumperless) |
| - Auto baud rate detection
up to 115.2 Kbps |
| - Reserved space for
termination resistors |
| - Power and activity
indicator for
troubleshooting |
| - Driver support for Windows
95/98/ME/2000/XP, Linux |
| - Power requirement: USB bus
power |
| - Mounts easily on DIN-rail
or panel |
| - USB Controller : USB
1.1 |
| - USB interface connector :
USB type
B |
| - Isolation Side :
RS-232/
422/485 |
- Converted signals :
RS-232/RS-422 or RS-485
Auto switching
(jumperless) |
| - Handshake : RS-232 RTS
& CTS |
| - Auto Baud rate (bps) :
300 ~115.2 K
BPS |
| - Data
activity : LED
indicator |
| - Isolation voltage :
3000 V
DC |
| - RS-232/RS-422/RS-485
connector : plug-in screw
terminal |
- Accessories (Supplied) :
NYLON DIN-rail Mounting Adapter
SECC Panel - Mounting
Bracket |
- Plug-in screw terminal
wiring : Accepts AWG
1-#12 to #22 (0.5 to
2.5 mm) wires |
| - Power requirement : USB
bus power |
| - Case : ABS with captive
mounting hardware |
| - Power consumption :
0.65
W | |
|
|
|
|
 |
|
